Hybrid Wind Solar Controller MPPT Boost Charge Turbine Generator 1400W 12V 24V

Description

Hybrid Wind Solar Controller MPPT Boost Charge Turbine Generator 1400W 12V 24V
Item Description
This controller is specially designed for high-end small-scale wind/solar hybrid system and especially suitable for wind/solar hybrid street light system and wind/solar hybrid monitoring system. It can simultaneously control wind turbine and solar panel to charge battery safely and efficiently.
Intelligent, modular design, simple mechanism, powerful functions. With industrial range superior components and strict production technology, the controller can be used in relatively bad working environment and has reliable performance and long life-span.
Key Features
The wind charging part and the solar charging part of this wind solar hybrid controller are independent of each other, can be used independently as a wind controller or a solar controller.
The wind charging circuit of this controller features advanced MPPT boost charging technology to extract the maximum possible power from the wind turbine in low wind speeds.
The solar charging circuit of this controller uses MOS tube PWM technology, which minimizes the power consumption of the controller and makes the system more stable.
In high wind speed or when wind turbine is generating power that is beyond the scope of the battery, controller immediately switches to stepless dumpload mode, protecting your system.
The user-friendly interface includes an LCD display and four easy to use buttons for simple and convenient operation.
Multiple protections, including reverse solar charge protection, battery open circuit protection, battery reverse protection, over-wind speed, over-voltage and lightning protection.
1400W MPPT Wind Solar Hybrid Boost Charge Controller 12V/24V apply for 800W 600W wind turbine generator +600W 400W solar panels system
The controller is designed specifically for hybrid wind solar street light system, which can make the wind solar hybrid street light system of various resources to achieve the best configuration, of course, the controller with some simple Settings can also be used in household system.
Intelligent design succinct structure, powerful control, stable performance, safety and reliability of the products. Choose MPPT Wind turbine charging ways, charging more efficiency than ordinary PWM way more superior. The boost charge function, solve the low charging efficiency problem of low wind speed (optional). Professional digital intelligent control.
The Wind turbine charging part and Solar charging part are independent of each other, can make Wind turbine controller or solar controller using independent (As a Wind turbine controller cannot use light control function).
Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used;
In the high wind speed or the Wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the steeples unloading function, protection system of the equipment.
Solar charging using in series MOS tube PWM technology, which makes the controller power consumption is small, the system more stable.
Discharge part working mode can be set, light control mode, time control function etc., The user can be set up according to the requirements on its own combination.
Man machine interface of the controller USES a custom LCD screen and four key operation mode, the user to use simple and easy to use, popular and easy to understand, convenient and quick.
The controllers with perfect protection function, including: lightning counter-attack, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, etc.
Note: These hybrid controller are all 12/24V Auto Recognition.
System Parameter
Model
450W30
500W30
750W50
900W60
1100W60
1200W60
1400W80
System Rated Voltage
12V(9V-16VDC)
24V(18V-32VDC)
Solar Module
Voc
27.6V
55.2V
Vmp
>Vbat+1V
>Vbat+1V
Imp
8.3A
11.1A
13.9A
16.7A
16.7A
20A
20A
Workable Power
0W~150W
0W~200W
0W~250W
0W~300W
0W~500W
0W~600W
0W~600W
Wind Turbine
Rated Voltage
12VAC
（
20.8VDC
）
24VAC(41.6VDC
）
Rated Current
16.7A
16.7A
27.8A
33.3A
20A
20A
26.7A
Workable Power
0W~300W
0W~300W
0W~500W
0W~600W
0W~600W
0W~600W
0W~800W
DC Load
Out Power
0W~180W (Per one-way)
0W~700W (Per one-way)
Rated Voltage
12VDC
24VDC
Current Max
30A(15A*2)
30A(15A*2)
Battery
Max Charging
25A
27.8A
41.7A
50A
36.7A
40A
46.7A
Special Note: No one-key restore function, please do not modify preset parameters.
Uunder
Over Discharge Voltage
10.8V
21.6V
Runder
Over Discharge Return
13.1V
26.2V
Uover
Over Charge Voltage
15.5V
31.0V
Rover
Over Charge Return
15.0V
30.0V
BCV
Increase Charge
14.4V
28.8V
Float
Floating Charge
13.8V
27.6V
Ufanbraking
Wind Breaking Voltage
25.6V
51.2V
No-load Current
≦
0.1A
Voltage drop (DC)
≦
0.5V
Control mode
Wind turbine MPPT charge function, PWM uninstall function, PWM over-current limiting
Boost charge
Flexible independent step-up circuit (optional)
Environment
Temperature
1) Working:-20℃ ～50℃; 2)Storage:-30℃ ～70℃
Humidity (°C)
10% ～ 90% No condensation
Protection Grade
IP30
Weight
G.W
2.7KGS
Size
Technical note:
In off grid system, there is always a pair of contradictions that produce energy source and energy absorption of load does not match the problem, may be the following situation:
The power supply can be issued under the condition of sufficient electrical energy of the load is not likely to work and the battery power is full, so this time we need to send power electricity do discharge processing, otherwise may cause permanent damage to the equipment;
In the power supply does not have enough electric power support is likely to appear when battery power is rarely lead to load can not have normal work, so we also need to improve power generation capacity in this situation.
In our wind solar system, solar panels power relative to the Wind turbine power is very stable power supply, so we had a wind solar hybrid controller mainly for Wind turbine design the booster MPPT charging technology and step-less unloading function, and in view of the solar panels still take simple and efficient PWM charging technology.
Booster MPPT mainly for most of the time in many parts of the wind power is not enough to support a generator to the condition of the battery charging, specific working principle is: the Wind turbine under the condition of wind speed reach the rated wind speed, the resulting voltage and power are not reach the rated power, we through real time acquisition Wind turbine by means of booster circuit of voltage and current from the boost voltage to the battery voltage to the system requirements, using the software MPPT algorithm make the Wind turbine of power use as much as possible.
Steeples unloading function mainly aimed at the first case, when don't need additional energy, will generate the energy consumption of the Wind turbine on unloading device, the controller dedicated connection port of unloading device, the user can be selected according to actual condition when the choose and buy, we suggest in good wind conditions, such as coastal and western is empty, you must configure un loading ;In some inland areas where wind conditions in general, we also recommend that try to configure unloading.
Package Included:
1 x
Hybrid Wind Solar Controller
1.How to connect these 3 terminals of controller with my wind output wires?
(1) To AC wind turbine, any one of three wires from wind turbine can be connected with any terminal of wind on your controller. For they are non-electrode;
(2) To DC wind output is 2 wires(Positive Negative) , you can connect them with any wind terminals on your controller.
2.How many connecting ways user can choose when using this controller?
For the wind charging and Solar charging are independent, so user can choose any one of the following as the connection method :
(1) Only connect wind turbine generator to charge battery;
(2) Only connect solar to charge battery;
(3) Connect wind turbine and solar to build a hybrid wind solar power system to charge battery.
3.Can i only connect wind turbine as generator to charge battery when i get my controller?
Yes, you can to do so. But for the main purpose of such controller designs for low power consumption equipment charging, such as: street lights and monitoring etc. So establish hybrid wind solar system can get better charging guarantee. Because most of low-power wind turbine is installed in or close to the residential place, wind generation efficiency is not high due to the low wind speed and short working time.
4.How to connect my system when I get this controller?
We strongly recommend user to install air switch between all DC and AC input or output. Then please turn on the breaker/ air switch in this order:
(1) First turn on the breaker between battery and controller;
(2) Second turn on the breaker between wind and controller;
(3) Third turn on the breaker between DC load and controller;
(4) Final turn on the breaker between Solar and controller.
Remark: If you want to shut down the system, please proceed in the reverse order as above.
5.Do i need to install additional light protecting for my power system?
Yes, it is best way to install additional light protecting.
6.How the controller to operate when the wind speed is too fast?
(1) For the output voltage or current from wind generator which beyond the safety range, the controller will automatically turn on the brake and gradually slow down. Meanwhile, the dump load will start to consume excess current immediately.
(2) But when encountering strong storm weather, such as hurricane, typhoon, it is strongly recommended to put down the wind turbine immediately.
7.How to design hybrid wind solar power system voltage, 12V, 24V, 48V, which one is best to me?
(1) The system voltage is equivalent to the voltage of the battery pack;
(2) Once the battery voltage designed, the input voltage from wind turbine generator and solar modules must be matched according to the specifications in the parameter table;
(3) Therefore, users cannot simply think that more lower voltage design, can get more bigger charging current but ignore that the excessive current has exceeded the working range of the controller or battery to damage the controller or battery.
8.Why wind part designed in MPPT, but solar part designed in PWM?
(1) Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used;
(2) In the high wind speed or the Wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the step-less unloading function,protection system of the equipment.
(3) Solar charging using in series MOS tube PWM technology, which makes the controller power consumption is small, the system more stable.
9.When the wind generator is connected to the controller, why its running speed becomes very slow immediately?
(1) The battery reaches the floating voltage;
(2) The rated output voltage of the wind generator is much higher than the battery, because the speed of the wind generator is proportional to the output voltage, and the voltage is dragged by the battery, so the speed will be very low;
(3) The dump load MOS was burnt out because of wrong operation.
10.Why wind generator dump load when the controller displays small current?
The controller protect the all system by detecting battery voltage, charging current and temperature and so on. When the battery reach floating charge voltage or high temperature, the wind generator will dump load, no matter how much charging current it is.
11.Why there showing no charging current on LCD screen but the wind is running or the solar is working?
Only when the input voltage of solar panels or wind generator higher than battery then it can charge.But the prerequisite is that the battery is properly connected and not fully charged.
12.Why the LCD does not light up?
For the power of controller comes from battery or solar when its working. So please check solar input or battery as follows:
(1) The battery didn't connect the controller well, please check the battery and controller connection;
(2) Battery is damaged, please check and replace the battery;
(3) In good sun day the solar input is workable or not.
13.What kinds of parameter of this controller is adjustable by user(Pilot version & Deluxe Version)?
(1) All data have been set for the best charging work before packing, so no need to make any settings for sealed battery. The default is sealed battery too;
(2) To lithium-ion batteries, user only need to select the corresponding battery type according to the manual operation guide, so there is no need to adjust the parameters;
(3) If the professional users need to make additional parameter adjustments for their own lithium battery characteristics, Pilot version and Deluxe Version are supported.
14.Through LCD display, what kind of data i can set(To Classic Version)?
(1) Float charging voltage.
(2) Wind turbine unloading voltage (dump load)
15.What kind of discharge part working mode can be set?
Light control mode, time control function etc, The user can be set up according to the requirements on its own combination.
Please read the following information carefully:
1. Please check whether the package is complete and the accessories are complete in time.
2. The 2 or 3 wires from wind turbine generator/PMG output are non-polar, so they can be connected to the wind interface of the controller out of order.
3. Please try to install air switches/breaker and lightning protection devices on the both of DC and AC terminals.
4. The input wires of positive and negative from solar to your controller or controller to battery must not be reversed.
5. If your controllers can be equipped with WIFI monitoring data collector, and you need it, you can buy it separately on our store or purchase another ASIN with WIFI packaging;
6. In order to ensure the least power loss during transmission, please pay attention to the following:
1) Dedicated DC connection cable is required,
2) Both controller/inverter connecting with controller DC terminal must be tightened.
3) DC cable’s diameter must be meet the requirement as the instructions. It cannot be replaced by a normal AC cable.
7. Especially if this controller with LED indicator design, the red light does not mean that controller is malfunctioning, but for protection function is activated. Your controller can work normally after troubleshooting. And some controller design red flashing indicator means charging work is in progress.
8. The wind turbine generator/PMG can fly relatively quickly and easily before it is connected to the controller, but once it is connected to the controller, the speed of rotation will be reduced immediately. This is because of electromagnetic resistance, which is a normal physical phenomenon.
Note: to know about more instruction and model, please contact us for FREE beautifully illustrated user manual
If you have any questions, please feel free to contact us, we are always at your service.
Payment
Please ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled.
Shipping
Once we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
Return
We offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.